A brief introduction to igncomm

Complete Game Information：

• 1、What is the phicomm router setup method
• 2 、What brand is phicomm?
• 3
  、How to set up a wireless router in phicomm

What is the phicomm router setup method

1. You can set it up as follows: Plug the power adapter of the Feixun router into the power interface behind the router, plug the network cable from the light cat into the "wan" port of the router, and use orange to distinguish it from other interfaces, as shown in the following figure.

2. The phicomm router setting method is as follows: Prepare materials: phicomm router and computer open the web page, enter 19161 in the address bar, click the right to go symbol to open. After opening the router login interface, enter your username and password and click Login. After entering the router management interface, click the "Wireless Settings" button on the left to enter the wireless network settings.

3. For most phicomm routers, the default user name is admin, and the password is empty or also admin. If you have ever changed your username and password, you need to enter your modified login credentials. After successfully logging in, you will enter the management interface of the phicomm router. On this interface, you can make various settings and configurations.

4. The Phicomm router is set up as follows: Connect the power supply and network cable: Plug the power adapter of the Phicom router into the power interface on the back of the router. Plug the network cable from Gimcat into the WAN port of the router. Power on and find the management address: Power on the router. Check the management address on the back of the router. Generally, the management login address of Fiicom routers is p.to, but different models may vary. Please refer to the label on the back of the router.

What brand is phicomm?

1. Phicomm, Phicomm brand, headquarters in China. Focus on communication technology and equipment supply. Brand overview: Pichon is a leading communication technology company with rich wireless communication, broadband access, and home intelligent network products. The brand name "Phicomm","Phi"(the golden ratio in philosophy) and "Communication" are combined to reflect the promise of high-quality communication solutions.

2. Phicomm is the name of the Phicom brand. Phixun is a communications technology and equipment supplier headquartered in China. The following is a detailed introduction to Fixom: Brand Overview Fixom, as a well-known communications company, has strong technical strength and rich product lines in the fields of wireless communications, broadband access and home intelligent networks.

3. Feixun. Shanghai Feixun Data Communication Technology Co., Ltd. is a high-tech enterprise committed to the research and development, manufacturing and sales of network communication equipment. It has established branches, offices and R & D centers in many cities at home and abroad. With its core competitiveness of "rapid response and high cost performance", it has become a high-profile emerging brand in the communication equipment industry. Feixun.

How to set up a wireless router in phicomm

1. Since the router is not set up, the indicator light on the front of the Pfixun router is red at this time. We open the wlan of our phone and find the open wifi signal "@PHICOMM "in the wlan list. Click on the signal to connect, or use a laptop to connect, as shown in the figure below. After connecting to the hotspot, you cannot access the Internet because you have not made router settings. At this time, we open our mobile browser and enter the management address of our Fixom browser.

2. The setting steps for the phicomm1218 wireless router are as follows: Connect the hardware: Connect the power supply of the router, connect one end of the network cable to the computer network port, and the other end to the router's LAN port. Enter the settings page: Open a computer browser, enter the router IP address 19160.1 in the address bar, enter the login interface after entering. Enter the username admin, the password is blank, and click login to enter the settings homepage.

3. The steps for setting up the phicomm wireless router are as follows: Prepare to connect the router before configuration: Make sure the router is powered on and all interfaces are not connected to the network cable for the time being. Handle the original network cable: Unplug the network cable currently connected to the computer (called "network cable A "), and keep the end connected to the cat. Prepare another network cable ("Network Cable B "), connect one end to the computer and the other end to the digital port (LAN port) of the router.

4. Open the web page and enter 19161 in the address bar, click on the right to go to the symbol to open. After opening the router login interface, enter your username and password and click Login. After entering the router management interface, click the "Wireless Settings" button on the left to enter the wireless network settings. Click to enter the "Wireless Basic Settings" page, make some basic settings for the wireless network, and finally click the "Save" button.

5. First, connect the power interface and the external network interface in turn, press the power button, and the Fiosom K3 wireless router will start working. If you have a wired network at home, just connect the network cable to LANs 1 - 3 in turn. Open the mobile phone WiFi settings page, or click the wireless network icon on the taskbar of your PC, select@PHICOMM_XX (XX is the last two digits of the MAC address at the bottom of the router), and you can enter the settings page of the Phixun K3 wireless router.