A brief introduction to resorcemap

Complete Game Information：

• 1 、Simple steps for PROE drawing
• 2
  、pro Online Drawing-Simple steps for PROE drawing

Simple steps for PROE drawing

The steps for Proe or Creo drawing are to turn off the weak size column (automatic column) and draw the center line first, then use tools such as straight lines, circles and arcs to draw the figure according to the general shape. Mark it after the drawing is completed, and uniformly modify the size after marking. Until the drawings are completed.

The steps for drawing a simple machining fixture using PROE0 are as follows: Preparations Make sure the PROE0 software is installed and prepare a running computer. Create a new part file Open the PROE0 software, select "New" → "Part", enter the file name and confirm it. Draw a basic sketch and select a sketching plane (such as FRONT datum) to enter sketching mode.

The simple steps of PROE drawing teaching content: drawing and selecting a picture frame, selecting a view, making an engineering drawing (annotation, detail, section view, tabulation). Teaching purpose: Be able to make standard engineering drawings completely divorced from CAD.

The method steps are as follows: First, open the computer, open the PROE software in the computer, create a new part, and select the drawing unit as mm. Click on the sketching plane, draw two concentric circles, and modify the diameter of the circles. Use the Stretch tool to stretch the two concentric circles you draw into a solid body and enter the stretch distance. Use the right plane as the benchmark, offset by 120 to create a new datum plane, and use this datum plane as the sketching plane to draw the figure.

The specific steps for drawing polygons in PROE0 are as follows: Enter the stretch function interface and start the PROE0 software. After completing the working directory setting and creating a file, select the stretch tool in the function menu. To define the sketching plane, click the Place button in the operation interface, and select Define from the pop-up options. At this time, you need to specify the sketching datum plane. It is recommended to use the default TOP plane. You can also select other datum planes according to design requirements.

pro Online Drawing-Simple steps for PROE drawing

The simple steps of PROE drawing teaching content: drawing and selecting a picture frame, selecting a view, making an engineering drawing (annotation, detail, section view, tabulation). Teaching purpose: Be able to make standard engineering drawings completely divorced from CAD.

The basic steps of Pro/Engineer (ProE) drawing are as follows: Create a view and adjust the display to create a new drawing: Enter necessary parameters (such as units, scales, etc.), and select the corresponding part model and frame template. Insert Normal View: After entering the drawing interface, right-click to select "Insert Normal View", left-click at the target position to place the main view, and the "Drawing View" dialog box will pop up.

Preparing for starting Creo software: Open the Creo software and enter the work interface. Set working environment: Set parameters such as units, precision, and template as needed. Create or open a part file to create a new part: If necessary, you can create a new part file through "File"-"New". Set up part names, templates, etc.

Creating solid features through rotation is a common and powerful modeling method in Pro/Engineer (ProE for short). The following is a detailed description of the steps: Create a closed curve as a rotated section Open the ProE software and create a new part file. Select the Top face or any other datum plane as the sketching plane. In a sketching environment, draw a closed curve. This curve will serve as a section of the rotated solid.